Index

Code Snippets

  1. Basic 1 Wire Read Temp
  2. Basic BMP180
  3. Getting 1 Wire Device Address's
  4. GSM signal tester
  5. Multi 1 wire by device address
  6. SMS Sender
  7. Software Serial Mode Set
  8. Wifi Signal Tester
  9. UVM30A Analogue Sensor
  10. Tipping Bucket Rain with Light (Current WIP)
  11. Another way to Count

Getting 1 Wire Device Address's

Mining the 1 Wire Device Address's

/*-----( Import needed libraries )-----*/
#include <OneWire.h>

/*-----( Declare Constants and Pin Numbers )-----*/
#define SENSOR_PIN 2  // Any pin 2 to 12 (not 13) and A0 to A5

/*-----( Declare objects )-----*/
OneWire  ourBus(SENSOR_PIN);  // Create a 1-wire object

void setup()  /****** SETUP: RUNS ONCE ******/
{
  Serial.begin(9600);
 
  discoverOneWireDevices();  // Everything happens here!
}//--(end setup )---

void loop()   /****** LOOP: RUNS CONSTANTLY ******/
{
  // Nothing happening here
}

/*-----( Declare User-written Functions )-----*/
void discoverOneWireDevices(void) {
  byte i;
  byte present = 0;
  byte data[12];
  byte addr[8];

  Serial.print("Looking for 1-Wire devices...\n\r");// "\n\r" is NewLine 
  while(ourBus.search(addr)) {
    Serial.print("\n\r\n\rFound \'1-Wire\' device with address:\n\r");
    for( i = 0; i < 8; i++) {
      Serial.print("0x");
      if (addr[i] < 16) {
        Serial.print('0');
      }
      Serial.print(addr[i], HEX);
      if (i < 7) {
        Serial.print(", ");
      }
    }
    if ( OneWire::crc8( addr, 7) != addr[7]) {
      Serial.print("CRC is not valid!\n\r");
      return;
    }
  }
  Serial.println();
  Serial.print("Done");
  ourBus.reset_search();
  return;
}

//*********( THE END )***********